A blue screen of death, or BSOD, is caused by a System Service Exception fault. It is caused by incompatibility between windows and driver installations. Some of the most typical causes of this issue include corrupt, obsolete, or malfunctioning drivers, bad memory, or erroneous registry configurations.
In Windows 10, How Can You Fix The System Service Exception Error?
There are numerous options for resolving the problem. So, let’s look at a couple options for resolving this issue. These methods are trustworthy and dependable. Give them a shot!
1. Startup Repair
It helps with System Service Exception if you run Startup Repair.
Step 1: Before restarting the computer, use the shift + F8 function. This will bring up the Legacy Advanced Boot Options window. A popup with a few options will appear on your screen. Select Troubleshoot from the list of alternatives.
Step 2: From the Troubleshoot screen, select Advanced options. The option Startup/Automatic Repair must be selected from the Advanced settings panels. Following the processes outlined above, the system will automatically check for difficulties and assist in their resolution.
Step 3: Restart your computer, and the System Service Exception window 10 error should be resolved; if not, proceed to the next method.
2. Use The Disk Check and System File Checker Programmes
Step 1: The first key to press is Windows key+x.
Step 2: When a drop-down menu appears on the screen, select command prompt(admin). The command prompt window will appear.
Step 3: Type the commands below, pressing enter after each one. Maintain patient while the process runs, as it will assist in finding, correcting, and repairing all malfunctioning sections. This will result in your hard drive’s sectors being cleaned or cleansed.
Step 4: Restart your computer, and all of your modifications will take effect.
3. Update Your Drivers
Step 1: Press the window key+r to open the dialogue box.
Step 2: Next, type msc and press Enter to go to Device Manage. Update any drivers that have a yellow exclamation point next to them, including video and sound card drivers.
Step 3: To complete the driver update, follow the on-screen instructions.
Step 4: If this doesn’t work, uninstall your drivers and reboot your computer. The drivers will be installed automatically after the reboot.
Step 5: Once the download is complete, run the Intel Driver Update Utility.
Step 6: Go to the next step and run the software. Click to accept the licence agreement. Select Install once the system upgrade is complete.
Step 7: In the utility application, select start scan with and wait for the drivers to be completely scanned before downloading.
Step 8: After the drivers have been installed completely, restart your computer. This should take care of the issue.
4. Disable the KB2778344 Windows Update
Yes, it sounds unusual, but it could work. You must first boot into safe mode before uninstalling the Windows security update KB2778344.
Step 1: Select Control Panel>Programs>Programs&Features from the drop-down menu.
Step 2: On the upper left, select View Installed Updates. Then, in the search bar, type KB2778344.
Step 3: When the screen displays a specific Windows security update, right-click. The update will be removed after you uninstall it.
Step 4: When you’re asked for confirmation, say yes. When you finally reboot your PC, the System Service Exception issue will be gone.
5. Run The Windows Memory Diagnostics programme
Step 1: In the Windows search box, type memory and then pick Window Memory Diagnostic.
Step 2: When two options for troubleshooting appear, select Restart now. When Windows starts searching for faults in RAM, it appears to now offer you the possible causes for the system service expection error notice.
Step 3: After rebooting, check to see if your problem has been resolved; if not, run Memtest86.
6. Use The BSOD Troubleshooter in Windows
Step 1: To begin, type Troubleshoot into the Windows search box and pick it.
Step 2: Next, go to the screen’s Hardware and Sound section and pick Blue Screen under Windows. After that, go to advanced options and make sure that the selection for apply fixes automatically is selected.
Step 3: Select Finish and wait for the process to complete.
When you ultimately reboot your PC, it will fix any small windows update errors or System Service Exception errors.
7. Download and Install Microsoft HotFix
Step 1: Technical support is sometimes the best, therefore go to microsoft support.
Step 2: Install Hotflix. Then, from the Microsoft availability, install it.
Step 3: Now is the time to restart your computer.
8. Use CClearn and AntiMalware Together
Step 1: Get CCleaner and Malwarebytes and install them.
Step 2: Run Malwarebytes and scan your PC for harmful files. If any are identified, Malwarebytes will also remove them. Under the Windows tab, look for a cleaner section.
Step 3: Double-check the right places beneath them and start the cleaner. To clear the PC even further, go to the Registery page and check into all of the essential settings.
Step 4: Run ccleaner and scan for issues. After that, click the Fix All Selected Issues button.
Step 5: Do you want backup changes to be registered when you choose yes? is enquired.
Step 6: After all backups have been completed, choose to address all chosen issues.
9. Uninstalling a Specific Program
When we talk about Windows 10, it’s evident that we’re talking about a few apps and software, such as:
- McAfee (McAfee) is a software company that
- A virtual clone drive is a device that allows you to create a copy of
- BitDefender is number four on the list.
- Xsplit is the fifth option.
- MSI live update
- VPN software
- As a USB media device
- Driver for Western Digital or any other external hard disc.
- Finally, graphics card software from Nvidia or AMD.
These programmes may cause issues. So, one by one, disable or uninstall them to see if the problem goes away.
That’s all I have to say about it. Hopefully, all of the following options have been of great assistance to you. Thank you for taking the time to read this!